Micro Hardness Tester - Mitutoyo HM100

A wide range of test forces from 9.807-3N to 9.807N (10gf to 1000gf) is available for measuring various types of specimens. The load duration can be set in 1 sec increments between 5 and 99sec*. The minimum reading of indentation is 0.01µm*. It allows small indentations to be measured with high precision.


--

Micro Hardness Tester

The Mitutoyo HM100 micro hardness tester offers a wide range of test forces from 9.807-3N to 9.807N (10gf to 1000gf) is available for measuring various types of specimens. The load duration can be set in 1 sec increments between 5 and 99sec*. The minimum reading of indentation is 0.01µm*. It allows small indentations to be measured with high precision.
Features


  • Diamond Indentor

  • 10X Objective

  • 50X Objective

  • Comparison Test Piece

  • X-Y Stage 25x25mm travel

  • Vice – max 45mm groove width

  • Vinyl Machine Cover

  • Instruction Manual

  • Connecting Cables

  • Camera port.


Specifications















































Standard Machine
Test Load 10,25, 50, 100, 200, 300, 500, 1000kgf
Load Control Automatic (Loading, duration & unloading)
Load Duration 5 to 90 seconds in 1-second increments
Accuracy ± 1%
Resolution .01μm
Max. Specimen Height 90mm
Max. Specimen Depth 100mm
Power Supply 240V 60Hz Single Phase
Weight ~42kg
Further Information

  • Operator Activated start function from minor load position

  • Constant Loading Speed

  • Variable or automatic load duration function

  • Hardness number offset function

  • RS232/Digimatic Output enabling linkage with any Mitutoyo processor

  • Special purpose safety light to protect indentor and monitor test piece

  • Telescopic Leadscrew Cover



 
Microhardness

The term "microhardness" has been widely employed in the literature to describe the hardness testing of materials with low applied loads.

You may also like

Recently viewed