Coating Thickness Gauge NOVOTEST TP-2020

Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).

  • To suit specific control requirements depending on the thickness, base and coating to be measured, there are various types of probes. Coating Thickness Gauge TP-2020 has a wide range of measured coatings (from 0 up to 60 mm), therefor are able to make protective coatings revision starting with films, body paint thickness to coatings of metal constructing, bridges, oil and gas pipelines and other objects with bitumned coatings. Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals Automatic sensor detection Wide range of sensors for different tasks Selecting units of measure Storing individual calibrations in probes memory Average calculation, minimum and maximum indication High measurement accuracy Transfer of measurement data to PC via usb Portability Large buttons Enlarged screen Shockproof housing with a special protective silicone bumper case Charge control
  • Coating thickness gauge TP-2020 has operating modes that make it able to rapid and with high accuracy inspect of protective coatings.

    • Normal – the device displays the value of the current measurement or the average over a series of measurements
    • Control – used in cases where it is necessary to control the coating with clearly defined thicknesses. During measurements, coating thinness gauge illustrate the difference in thickness of the measured and reference coatings, analysing which the operator makes conclusions about coating quality
    • Statistics – monitor the following parameters of a series of measurements: maximum and minimum value, deviation, average value, number of measurements
    • Automatic averaging mode – after each measurement, the device by default includes this result in the set of averaged values

    Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020 

    Coatings on steel (dielectric and conductive
    coatings on ferromagnetic metals and alloys)
    Type of probeCoating thickness measurement rangeMeasurement accuracyDimensions of the probe, mmPurpose
    probe F-0,3 0-300 μm±(0,03h+0,001) mm Ø5×40Measurement of paint, varnish and galvanic coatings
    probe F-0,5 0-500 μm±(0,03h+0,001) mm Ø 8×15
    probe F-2 0-2000 μm±(0,03h+0,002) mm Ø 10×35Measurement of paint and varnish coatings
    probe F-5 0-5000 μm±(0,03h+0,002) mm Ø 18×40Measurement of paint, varnish and mastic coatings
    Coating on the non-magnetic metals
    (Any (dielectric or metal) coatings on non-ferrous metals and alloys)
    probe NF-2 0-2000 μm±(0,03h+0,002) mm Ø 12×35Measurement of anodic-oxide films and paint coatings
    Thick coatings on metals (dielectric coatings on metals)
    probe M-12 0-12 mm±(0,03h+0,02) mmØ 15×50Measurement of mastic coatings
    probe M-30 0-30 mm±(0,03h+0,03) mm Ø 40×50
    probe M-60 0-60 mm±(0,03h+0,05) mm Ø 70×60
    Measurement of surface roughness, Rz
    (After abrasive blasting pre-painting work)
    probe DSH 2-300 μm±(0,03h+0,002) mmØ 18×40Measurement of surface roughness after sand and shot blasting
    Temperature, humidity and dew point
    probe DT -50 … +80 ° C + / – 1 ° C Ø 12×107Temperature measurement
    probe DTVRHumidity: 0 – 100%
    Temperature: -50 … 80 °C
    Dew point: -15 – +40 °C
    ± 5%
    ± 1 ° C
    ± 2 ° C
    Ø 50×120Measurement of temperature, humidity and dew point


    • Thickness gauge electronic unit TP-2020
    • Standart probe ( by customer’s choice)
    • Set of reference thickness samples
    • Batteries (AA) – 2 pcs
    • Charger
    • USB cable
    • Operating manual
    • Case

Recently viewed