Spectrographic

Abrasive Wheels 250mm 1.6mm (Pack of 10)

£102
Image Part Number Price Variant Purchase Quantity
SS Soft and Medium Ferrous Metals – 20 to 35 HRC 1065210 1065210 £102.00 SS Soft and Medium Ferrous Metals – 20 to 35 HRC 1065210
MS Medium Hard Ferrous – 38 to 58 HRC 1065220 1065220 £102.00 MS Medium Hard Ferrous – 38 to 58 HRC 1065220
HS Hard and Very Hard Ferrous – 55 to 70 HRC 1065230 1065230 £102.00 HS Hard and Very Hard Ferrous – 55 to 70 HRC 1065230
NF Soft Non Ferrous - 8 to 38 HRC - 1065240 1065240 £121.00 NF Soft Non Ferrous - 8 to 38 HRC - 1065240
TNF Very Ductile Non Ferrous - 8 to 38 HRC - 1065250 1065250 £132.00 TNF Very Ductile Non Ferrous - 8 to 38 HRC - 1065250
HGST Surface Hardened Treatments - 63out-38in HRC - 1065260 1065260 £102.00 HGST Surface Hardened Treatments - 63out-38in HRC - 1065260

Spectrographic

Abrasive Wheels 250mm 1.6mm (Pack of 10)

£102

Abrasive cutting wheels with a cool-cut, self cooling formula designed for improved wet metallurgical cutting. Sectioning of metallurgical samples to give high quality cutting for a range of material types, with the selection of the correct grade optimised for each material type.

  • SS Soft and Medium Ferrous Metals – 20 to 35 HRC
  • MS Medium Hard Ferrous – 38 to 58 HRC
  • HS Hard and Very Hard Ferrous – 55 to 70 HRC
  • NF Soft Non Ferrous - 8 to 38 HRC
  • TNF Very Ductile Non Ferrous - 8 to 38 HRC
  • HGST Surface Hardened Treatments - 63out-38in HRC
  • Thickness – 1.6mm, 32mm steel reinforced arbor
  • Grades available  SS, MS, HS, NF, TNF and HGST

Self Cooling Cutting System

A new kind of mixture, enriched with some components having the hallmark of heat absorption, gives to the wheel an undeniable property of self-cooling. This way it can keep much more heat during the cutting without giving it to the sample whose surface layer is unchanged.

Ergonomic Cutting System

The revolutionary distribution method of the abrasive grain inside the wheel, according to the latest studies on the structure of the same, keep the cutting quality unchanged.
This method prevents the excessive overheating of the sample surface in spite of the decrease of the peripheral speed during the cutting stage.


The cutting off is the most important and delicate preliminary stage of the metallographic sample. The use of an unfit wheel might irreparably prejudice the final results of the analysis because an overheated surface irretrievably changes the main features of its structure. Getting an optimal finish at the end of the cutting action, is also essential to reduce the polishing time of the sample or the possible coupling with other surfaces (in case of bar or linear slide cutting). In cooperation high performance manufactures, we have developed a whole range of metallographic cutting wheels using first quality raw materials providing very high performances.

The constant introduction in the market of new and efficient alloys, has persuaded us to develop a product to be up to the market's demands. This philosophy, along with a consolidated production method and a wide experience in the abrasive field, has made possible the make ready of a metallographic wheel with very high endurance and yield.

Spectrographic cutting wheels, are consistent with superior cutting performance. The high performance is achieved by the strict controls on each wheel throughout the production chain.

Thanks to its versatility, our company can offer the most suitable cutting solutions also customised in accordance with the different trade sectors: steelworks, forges, thermal treatments, bar and linear slides producers, producers of vanes for turbines and so on.

1

Standard resin bonded aluminium oxide (Al203) or silicon carbide (SiC) cutting wheels (blades) with 32mm central hole. Arranged in terms of hardness of material to be cut, these cutting wheels are suitable for applications where a high quality metallurgical cut surface is required.The cutting off is the most important and delicate preliminary stage of the metallographic sample. The use of an unfit wheel might irreparably prejudice the final results of the analysis because an overheated surface irretrievably changes the main features of its structure. Getting an optimal finish at the end of the cutting action, is also essential to reduce the polishing time of the sample or the possible coupling with other surfaces ( in case of bar or linear slide cutting ) . In cooperation high performance manufactures , we have developed a whole range of metallographic cutting wheels using first quality raw materials providing very high performances. The constant introduction in the market of new and efficient alloys, has persuaded us to develop a product to be up to the market’s demands. This philosophy, along with a consolidated production method and a wide experience in the abrasive field, has made possible the make ready of a metallographic wheel with very high endurance and yield. Spectrographic  cutting wheels, are consistent with superior cutting performance . The high performance is achieved  by the strict controls on each wheel throughout the production chain. Thanks to its versatility, our company can offer the most suitable cutting solutions also customised in accordance with the different trade sectors: steelworks, forges, thermal treatments, bar and linear slides producers, producers of vanes for turbines and so on.

  • Abrasive cutting wheels with a cool-cut, self cooling formula designed for improved wet metallurgical cutting. Sectioning of metallurgical samples to give high quality cutting for a range of material types, with the selection of the correct grade optimised for each material type.

    • SS Soft and Medium Ferrous Metals – 20 to 35 HRC
    • MS Medium Hard Ferrous – 38 to 58 HRC
    • HS Hard and Very Hard Ferrous – 55 to 70 HRC
    • NF Soft Non Ferrous - 8 to 38 HRC
    • TNF Very Ductile Non Ferrous - 8 to 38 HRC
    • HGST Surface Hardened Treatments - 63out-38in HRC
    • Thickness– 1.6mm, 32mm steel reinforced arbor
    • Grades available – SS, MS, HS, NF, TNF and HGST

    Self Cooling Cutting System

    A new kind of mixture, enriched with some components having the hallmark of heat absorption, gives to the wheel an undeniable property of self-cooling. This way it can keep much more heat during the cutting without giving it to the sample whose surface layer is unchanged.

    Ergonomic Cutting System

    The revolutionary distribution method of the abrasive grain inside the wheel, according to the latest studies on the structure of the same, keep the cutting quality unchanged.
    This method prevents the excessive overheating of the sample surface in spite of the decrease of the peripheral speed during the cutting stage.

    The cutting off is the most important and delicate preliminary stage of the metallographic sample. The use of an unfit wheel might irreparably prejudice the final results of the analysis because an overheated surface irretrievably changes the main features of its structure. Getting an optimal finish at the end of the cutting action, is also essential to reduce the polishing time of the sample or the possible coupling with other surfaces (in case of bar or linear slide cutting). In cooperation high performance manufactures, we have developed a whole range of metallographic cutting wheels using first quality raw materials providing very high performances.

    The constant introduction in the market of new and efficient alloys, has persuaded us to develop a product to be up to the market's demands. This philosophy, along with a consolidated production method and a wide experience in the abrasive field, has made possible the make ready of a metallographic wheel with very high endurance and yield.

    Spectrographic cutting wheels, are consistent with superior cutting performance. The high performance is achieved by the strict controls on each wheel throughout the production chain.

    Thanks to its versatility, our company can offer the most suitable cutting solutions also customised in accordance with the different trade sectors: steelworks, forges, thermal treatments, bar and linear slides producers, producers of vanes for turbines and so on.

  • The cutting off is the most important and delicate preliminary stage of the metallographic sample. The use of an unfit wheel might irreparably prejudice the final results of the analysis because an overheated surface irretrievably changes the main features of its structure. Getting an optimal finish at the end of the cutting action, is also essential to reduce the polishing time of the sample or the possible coupling with other surfaces ( in case of bar or linear slide cutting ) . In cooperation high performance manufactures , we have developed a whole range of metallographic cutting wheels using first quality raw materials providing very high performances.
    The constant introduction in the market of new and efficient alloys, has persuaded us to develop a product to be up to the market’s demands. This philosophy, along with a consolidated production method and a wide experience in the abrasive field, has made possible the make ready of a metallographic wheel with very high endurance and yield.
    Spectrographic  cutting wheels, are consistent with superior cutting performance . The high performance is achieved  by the strict controls on each wheel throughout the production chain.
    Thanks to its versatility, our company can offer the most suitable cutting solutions also customised in accordance with the different trade sectors: steelworks, forges, thermal treatments, bar and linear slides producers, producers of vanes for turbines and so on.

Recently viewed