PreciCut 5000

The PreciCut 5000 precision cutting machine offers full control of cutting parameters with settings for feed speed, wheel speed, coolant control and length of the cut. The system even has a intelligent cut mode with monitors the cutting process and adjusts the parameters to ensure a high quality cut is maintained.

With a rotation speed from 100 RPM to 3000 RPM the PreciCut 5000 is suitable to cut almost any material. With easy maintenance and external re-circulation tank, high quality cutter is ensured.

    • Control panel displays all parameters and is used for selection and editing of programs.
    • With an external recirculation tank and coolant bars positioned at the cutting wheel, very high quality cutting is maintained on the most difficult samples.
    • The cutting arm is used for the sectioning of difficult samples and offers X movement to allow slicing of samples to accurate measurements.
    • Various vice options are available to accept difficult samples.
    • Special machine control mode gives resistance monitoring and speed of cut control.
    • Emergency stop to completely close down the machine in the event of an incident.
  • T Slot Table180 x 118 ( L x D) 10 mm T slot
    X axis40 mm by Manual
    Y axis150 mm
    Z axis ( Verticle)Fixed - it is not possible to move up & down
    Feed speed mm per minute min6mm per /min
    Feed speed mm per minute max150mm per / min
    For automaticY movement only ( Table Forward / Reverse)
    Automatic Y axis (serial cuts)Not possible
    Opening on left side and right sideTop open door system
    Maximum wheel size8" ( 200 mm)
    Maximum cutting capacity40 mm
    Variable speed range100 to 3000 rpm
    Motor0.75 Kw (1 Hp)
    Laser PositioningYes available at extra cost 20,000/=
    Recirculating System20L capacity
    Arbour Size12.7 mm / 25mm ( with flange )
    Electonic control5.7" PLC with HMI
    Electronic travel measuringY Movement
    Cutting Force dependent speed control              Yes available
    Automatic Pulse cuttingYes available
    Step cut/ Diagonal cut.Step cutting / continuous cutting
    Direct Positioning Via JoystickSpecimen positioning via joystick
    Current safety StandardsWe can provide Door limit switch ( If you need Door interlock system at extra cost ( 20,000/=)
    LED illuminationYes available
    Power Supply230 V/ 50 Hz ( Single Phase)
    Size600x680x460mm (door closed) / 600x680x850mm (door open)
    Machine Weight105kg

     

You may also like

Recently viewed