The PreciCut 5000 precision cutting machine offers full control of cutting parameters with settings for feed speed, wheel speed, coolant control and length of the cut. The system even has a intelligent cut mode with monitors the cutting process and adjusts the parameters to ensure a high quality cut is maintained. With a rotation speed from 100 RPM to 3000 RPM the PreciCut 5000 is suitable to cut almost any material. With easy maintenance and external re-circulation tank, high quality cutter is ensured.
- Control panel displays all parameters and is used for selection and editing of programs.
- With an external recirculation tank and coolant bars positioned at the cutting wheel, very high quality cutting is maintained on the most difficult samples.
- The cutting arm is used for the sectioning of difficult samples and offers X movement to allow slicing of samples to accurate measurements.
- Various vice options are available to accept difficult samples.
- Special machine control mode gives resistance monitoring and speed of cut control.
- Emergency stop to completely close down the machine in the event of an incident.
T Slot Table 180 x 118 ( L x D) 10 mm T slot X axis 40 mm by Manual Y axis 150 mm Z axis ( Verticle) Fixed - it is not possible to move up & down Feed speed mm per minute min 6mm per /min Feed speed mm per minute max 150mm per / min For automatic Y movement only ( Table Forward / Reverse) Automatic Y axis (serial cuts) Not possible Opening on left side and right side Top open door system Maximum wheel size 8" ( 200 mm) Maximum cutting capacity 40 mm Variable speed range 100 to 3000 rpm Motor 0.75 Kw (1 Hp) Laser Positioning Yes available at extra cost 20,000/= Recirculating System 20L capacity Arbour Size 12.7 mm / 25mm ( with flange ) Electonic control 5.7" PLC with HMI Electronic travel measuring Y Movement Cutting Force dependent speed control Yes available Automatic Pulse cutting Yes available Step cut/ Diagonal cut. Step cutting / continuous cutting Direct Positioning Via Joystick Specimen positioning via joystick Current safety Standards We can provide Door limit switch ( If you need Door interlock system at extra cost ( 20,000/=) LED illumination Yes available Power Supply 230 V/ 50 Hz ( Single Phase) Size 600x680x460mm (door closed) / 600x680x850mm (door open) Machine Weight 105kg